2019 Land Pride RCM4015 Series 2

Call for Price


Availability
Call for Availability
Year
2019
Manufacturer
Land Pride
Model
RCM4015 Series 2

Overview

Description

Combine the rugged, heavy-duty gearboxes from our RC5615 Cutter and the proven dependable deck from our RC3615 Cutter and you get the new Land Pride RC4015. The RC4015 features a 15' cutting width, 3.5" cutting capacity and heavy-duty gearboxes. The RC4015 is a solid medium-duty cutter in a long line of quality folding cutters from Land Pride.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • Factory assembled: Saves customer set-up time and money. Adjustments should always be made by dealer.
  • 7 Year gearbox warranty (Years 6 & 7 Parts Only): Shows confidence in gearbox integrity.
  • Rugged heavy built gearboxes:Gearboxes are capable of handling heavy cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 Piece shield on wing gearboxes: Driveline grease zerks are easier to access.
  • LP Performance self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Low hitch weight on tractor tongue: Ideal for smaller hp tractors by reducing the amount of weight on the drawbar
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft
  • Input driveline: Cat. 6 CV or Cat. 5 conventional: Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline
  • Drivelines with slip-clutches: Cat. 5 intermediate Cat. 4 WingsDriveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles
  • Grease zerks on end caps of driveline cross journals: Intermediate and wing driveline cross journals are easier to grease.
  • High blade tip speed: Allows clean cutting of material and even distribution. See Specifications for actual FPM
  • 6" Blade overlap: Eliminates skipping during turns.
  • Left wing rotates clockwise: Better discharge of material. Picks up tractor tracks
  • 3/16" Round stump jumper: Standard thick stump jumper material keeps damage to a minimum.
  • Smooth top design: Reduces accumulation of debris and is easier and faster to clean.
  • Deck sheet tops are 100% welded: Makes center decks and wing decks stronger.
  • 1/4" Sidewall thickness: Increased thickness reduces damage from objects being thrown into deck sidewalls
  • Beveled skid shoes on wings: Reduces gouging the ground when turning
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself
  • Wing transport lock: Wing transport locks will hold wings in the folded position in the event of hydraulic loss
  • Enclosed dual leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims
  • Spring-cushioned trailing arms: Protects unit from bumps and ground shock
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing entire axle assembly.
  • LED Signal lights: LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts
  • Wheel options:Laminated tires: Eliminates flats. Air-filled tires: Give better cushion while transporting. Foam-filled tires: Give better cushion while transporting and can’t go flat
  • LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Deck ring option: Keeps blades from damaging the deck
Specifications
  • Horsepower range: 50 - 200
  • Gearbox horsepower: 250 hp Divider, 210 hp Center & Wings
  • Gearbox oil capacity: Splitter: 3.5 pints; Center deck & Wings: 6 pints
  • Gearbox lubrication: Gear Lube 80-90W EP
  • Cutting capacity: 3 1/2"
  • Total Machine weight: 3,730 lbs
  • Tongue Weight:1,240 lbs.
  • Blade tip speed : Center blades = 16,300 FPM Wing blades = 16,000 FPM
  • Hitch types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch jack: Standard (7,000 lbs.)
  • Signal lights: LED
  • 7 Pin connector: SAE J5560 pin configuration
  • Cutting width: 15'-0"
  • Overall width: 15'-9"
  • Minimum transport width: 7'-11 3/4"
  • Overall length: 15'-6" (With center deck raised fully up)
  • Deck height: 12"
  • Cutting height: 2" to 14"
  • Lift hydraulics3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing hydraulics: 2 1/2" x 12" hydraulic cylinders, hoses & fittings
  • Wing transport protection: Wing Transport Locks
  • Deck material: 10 Gauge
  • Side skirt material: 1/4" Steel
  • Skid shoes-Wing deck: AR400 1 Replaceable skid shoe per wing
  • Skid shoes-Center deck: AR400 2 Replaceable skid shoes
  • Blades - 6 (2 per carrier): 1/2" x 4" Heat Treated Free Swinging Alloy Steel with Uplift
  • Blade overlap: 6"
  • Blade bolt: Keyed with hardened flat washer & locknut.
  • Stump jumper / blade holder: 3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
  • Deck ring: Optional
  • Front & rear guards: Optional rubber, single row chain, or dual row chain
  • Input driveline 540 & 1000 rpm: Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate drivelines: Standard - Category 4 with Slip-Clutch
  • Wing drivelines: Standard - Category 4 with Slip-Clutch
  • Tire options: 6" x 21" Laminated tires, 25.5" new foam filled tires, 29" x 16 ply used aircraft tires without foam filling.
  • Number of wheels, Standard axle: 4 - Wheels: Two on transport axle and one on each wing axle; 6 - Wheel option: Four on transport axle and one on each wing axle; 8 - Wheel option: Four on transport axle and two on each wing axle.
  • Transport axle: Spring-cushioned on center transport axle
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts

Specs

General

Working Width
15 ft.
Width
15 ft. 9 in.
Length
15 ft. 6 in.
Weight
3,730 lb.
Recommended HP
50-200 hp

Related Products